Ice SCRUB 35C, Руководство по эксплуатации и обслуживанию

Страница: 17 / 28

17 17
WORK
14.
PRE-WASHING FUNCTION: adjust the latch on the levers, to make them independent of each other.
Raise the left-hand lever so the rear squeegee rises up. Lower the right-hand lever so the front
squeegee rises up. In this way, only the brushes are working and the floor can be pre-washed.
Alternatively, by shutting off the water, you can use the machine to collect the dirt only.
15.
press the main switch (1) and check the green indicator light comes on
16.
press the suction switch (2)
17.
press the solenoid valve switch (3)
18.
At this point - by using the operating lever that activates the brushes (4) - the machine can work
efficiently until the detergent solution runs out or the batteries run flat
2. OVERFLOW DEVICE
The machine is fitted with a ball filter which is activated when the recovery tank is full, causing the suction
tube to close.
In this case, you must switch off the machine and empty the recovery tank.
WARNING: this operation must be carried out by wearing gloves to protect
against contact with dangerous solutions.
3. FORWARD MOVEMENTS
The traction of these machines is obtained by means of the front brush of the base which, by working at a
slight inclination, is able to drag the machine forwards.
WARNING: When making even brief reverse movements, verify that the rear
squeegee is raised.
WARNING: When making even brief forward movements, check the front
squeegee is raised.