Ice SCRUB 35C, Руководство по эксплуатации и обслуживанию

Страница: 18 / 28

18 19 18 19
AT THE END OF THE WORK
At the end of the work, and before carrying out any type of maintenance, perform the following operations:
1.
Turn off the solenoid valve switch (3)
2.
Raise the rear squeegee and lower the front one by raising the command levers
3.
Turn off the suction switch (2)
4.
Turn off the brush / main switch (1)
5.
Bring the machine to the place provided for draining the water
6.
Remove the recovery tank, then remove the bayonet cap and tilt the tank to empty it
WARNING: you are advised to always wear protective gloves in order to avoid
the risk of serious injury to your hands
WARNING: this operation must be carried out with the machine switched off
and the battery connector disconnected
7.
Take out the debris hopper and clean it carefully
ATTENTION: this operation must be carried out using gloves to
protect against contact with dangerous solutions.
8.
The action of lowering the front squeegee (lever up) also serves to raise the brushing unit at the end of
the work, to prevent the brushes becoming deformed
.