12
13
12
13
MACHINE PREPARATION
2. Remove the battery charger connector socket protection on the back of the machine (1)
3. Plug the battery charger cable (supplied with the machine) into the freed socket
4. Plug the battery charger cable into the mains socket
5. For the correct use of the battery charger, follow the instructions in the enclosed booklet
WARNING
: If one of the three LEDs flashes refer to the battery charger
manual supplied with the machine
WARNING:
the machine is equipped with an automatic system that
disconnects the power supply from the electrical system while the batteries are
being recharged
WARNING:
in order not to cause permanent damage to the batteries, it is
essential to avoid their complete discharge: arrange the recharge within a few
minutes of the switching on of the flashing "discharged batteries" signal
WARNING:
never leave the batteries completely discharged, even if the
machine is not being used
WARNING:
for the daily recharging of the batteries, you must fully respect the
indications provided by the manufacturer or retailer. All installation and
maintenance operations must be carried out by specialised personnel
WARNING:
danger of gas fumes and the leakage of corrosive liquids
WARNING:
Danger of fire: do not go near in the presence of free flames.
In the event that the charger is not built-in with the machine, carefully read the manual of the charger
that is used to recharge.
Содержание SCRUB 35C
Страница 27: ......
