16
17
16
17
WORK
1. PREPARING TO WORK
Before fitting the tanks, it is necessary to carry out certain operations:
4.
Open the two rear hinges of the battery compartment
5.
Connect the connector to the batteries
6.
Close the battery compartment
7.
Position the recovery tank on the handlebars, and connect the two tubes
8.
Position the solution tank and apply the quick connection (B)
9.
Adjust the quantity of water required by means of the tap lever (C)
10.
Lower the vent pin on the solution tank cap (A)
11.
Carry out the operations to prepare the machine
12.
WASHING AND DRYING FUNCTION: lower both squeegee command levers. In this way, the front
squeegee rises up and the rear one lowers, drying the newly washed part of the floor.
13.
WATER SUCTION FUNCTION: raise both command levers and pull the machine towards you. In this
way, the rear squeegee rises up and the front one lowers, acting as a water suction device (used
when cleaning under tables, desks, shelving, etc.)
Содержание SCRUB 35C
Страница 27: ......
