UNPACKING & INSPECTION
•
Carefully remove the appliance from the carton. Remove all protective plastic film, packing materials
and accessories from the appliance before connecting performing any installation procedure.
•
Carefully read all instructions in this manual and the
Installation Instructions
packed with the appliance
before starting any
installation.
•
Read and understand all labels and diagrams attached to the appliance.
•
Carefully account for all components and accessories before discarding packing materials. Store all
accessories in a convenient place for later use
COMPONENTS:
•
Grates (4 each)
•
Radiant (4 each)
•
Burner Assembly (4 each)
•
Adjustable Legs (Set of 4)
•
Grease Tray (1 each)
SETUP:
1. Setup the grill only on a firm, level, non-combustible surface.
2. Verify local codes for requirements. Concrete, tile, terrazzo or metal surfaces are recommended. Metal
or tile over combustible material may not meet code for non-combustible surfaces.
3. Install the provided adjustable legs, one on each corner of the appliance, in the holes provided.
4. Verify that the unit sits firmly ON
5. With the adjustable legs, adjust as required to level the appliance.
6. All four legs must be adjusted to firmly contact the countertop in order to prevent tipping.
•
Adequate clearance for air openings in the cabinet must be provided.
•
Refer to your local codes and ordinances for required clearances.
•
Maintain required clearances between the appliance and adjacent combustible surfaces.
Figure 2
10
