Ibml ImageTracDS 1210, Руководство пользователя

Страница: 10 / 123

5
Shock
●
Do not apply shock to the device by dropping it or hitting it against an object. If you use
the device after applying shock, it may cause electric shock or a fire may occur.
Placement
●
Do not put containers with water inside (e.g., vase or pot) or metal (e.g., paper clip) on
the device. If you use the device with water or metal inside, it may cause electric
shock or a fire may occur.
Moist and dusty place
●
Do not use the device in a moist or dusty environment, or a place where the room
temperature changes 10
℃
/Hr or more, causing dew outside or inside the device. If
dewing occurs, leave the device for several hours in the operation environment before
use. If you use the device with dew inside, it may cause electric shock or a fire may
occur.
Air Vent
●
The air vent is provided to prevent the internal temperature from rising too high. Do not
block the air vent with an obstacle over or in front of it. If you do so, the internal
temperature rises too high and the device failure or fire may occur.
Flammable Solvent
●
Do not bring a flammable solvent (e.g., alcohol or thinner) close to the device.
Disassembly
●
Do not disassemble or alter the device. It may cause electric shock or a fire may
occur.
Flammable Solvent
●
Do not bring a flammable solvent (e.g., alcohol or thinner) close to the device.
Cleaning
When cleaning the device, turn off the device and unplug the power cable from the
outlet. Use a piece of waste cloth soaked in neutral detergent and wrung dry to wipe the
outside of the device. Use a dry piece of gentle cloth (e.g., gauze) to wipe the inside of
the device. Do not use flammable solvents (e.g., alcohol or thinner).
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING