IBM xSeries 206m, Руководство по диагностике и обслуживанию

Страница: 119 / 144

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, Type 8849 and Type 8491 server,” on page 19 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
System-error log message Action
Fan x Failure
1. Make sure that fan x is not obstructed:
2. Reseat the following components:
a. Fan x
b. Fan x cable
3. Replace fan x .
Flash of x via y failed for user z...z Information only.
Flash of x by y via z was successful... w Information only.
Flash succeeded for x (address : y ) Information only.
Hard drive x removal detected. Reseat hard disk drive x and restart the server.
Hard drive x fault
1. Run the diagnostics programs.
2. Replace hard disk drive x .
3. Replace the hard disk drive backplane or back panel.
Internal error CPU fault Information only. If the message remains:
1. (Trained service technician only) Reseat the microprocessor.
2. (Trained service technician only) Replace the microprocessor.
Invalid userid or password received. Userid is x Information only.
LAN: Command mode tamper triggered.
Possible break-in attempt
Information only.
LAN: Ethernet interface is no longer active Information only.
LAN: Ethernet interface is now active Information only.
LAN: Telnet tamper triggered. Possible break-in
attempt
Information only.
LAN: Web Server tamper delay triggered.
Possible break-in attempt
Information only.
No ISMP gateway defined for the interconnect
network. RSA x is assuming the gateway
Information only.
OS Watchdog response enabled by x Information only.
OS Watchdog response disabled by x Information only.
PFA Alert, see preceding error in system error
log.
Information only. See the preceding entry in the system-error log.
Possible ASM reset occurred --- reason
unknown
Information only.
Power off Information only.
Power on Information only.
PPP_1: Client connected at nnnn bps Information only.
PPP_1: User requested to abort PPP interface Information only.
Chapter 5. Diagnostics
103