IBM TotalStorage Ultrium 3580 H23, Руководство по настройке и эксплуатации

Страница: 90 / 149

5. To view the most recent error code (the errors are numbered from 0 to 9, with 0
the most recent and 9 the oldest), press and hold the unload button for 3 or
more seconds, then release it to select the function. A message similar to the
following displays:
Display Err Code Log
0. Cooling Problem
6. Press the unload button again to view successive error codes. Messages similar
to the following display:
Note: To view another error code, wait 2 seconds before pressing the unload
button again.
Display Err Code Log
1. Cooling Problem
followed by:
Display Err Code Log
2. Media Error
7. To exit this function and maintenance mode, press the unload button until the
tenth error code displays (Error 9). Let 2 to 3 seconds pass between each
depression. Press the unload button again. The tape drive exits maintenance
mode and the following message displays:
Display Err Log
Exit Maint Mode
followed by:
Ultrium Tape Drive
Drive Empty
Function Code A: Clear Error Code Log
Function Code A erases the contents of the error code log.
1. Make sure that no cartridge is in the drive.
2.
Make sure that the following message appears on the message display (you
may need to turn the power off, then on again for the message to appear):
Ultrium Tape Drive
Drive Empty
3. Within two seconds, press the unload button 3 times. The status light becomes
solid amber and the following message displays (indicating that the tape drive
is in maintenance mode):
Maint Mode: Select
Exit Maint Mode
Note: If a cartridge is in the tape drive, it will eject the first time that you press
the unload button and the drive will not be placed in maintenance
mode. To continue placing the drive in maintenance mode, perform the
preceding step.
74
IBM 3580 Ultrium Tape Drive Setup and Operator Guide