IBM TotalStorage Ultrium 3580 H23, Руководство по настройке и эксплуатации

Страница: 109 / 149

Removing the Cover of the Internal Drive
1.
Using a Phillips screwdriver, remove the three screws and washers (see
1
in
Figure 31) that secure the bezel
2
to the internal drive
3
, then remove the
bezel.
2. Remove the cover of the internal drive by performing the following steps:
a. Remove the four cover-mounting screws and washers
4
.
b. Remove the cover
5
by lifting it up.
Fixing the Problem
1. Place the tape drive on its side as shown in Figure 32 on page 94.
2. Examine the tape to determine the source of the problem:
v
If the leader pin is jammed in the cartridge, go to the Note contained in step
4 on page 94.
v
If the leader pin has become detached from the leader block and is lying in
the tape path, go to step 3 on page 94.
v
If the leader pin has broken away from the tape, go to “Repositioning or
Reattaching a Leader Pin” on page 35.
v
If the tape has broken between the supply reel and the takeup reel, contact
IBM Technical Support.
Figure 31. Removing the cover from the internal drive
Appendix C. Manually Removing a Tape Cartridge
93