IBM TotalStorage Ultrium 3580 H23, Руководство по настройке и эксплуатации

Страница: 75 / 149

Appendix B. Performing Diagnostic and Maintenance
Functions
Table 9 describes each diagnostic and maintenance function that the 3580 Ultrium 2
Tape Drive can perform, gives its function code (which appears on the
single-character display), and directs you to the instructions for performing the
function. It is recommended that you use a scratch (blank) data cartridge for
diagnostic testing.
Table 9. Diagnostic and maintenance functions of the 3580 Ultrium 2 Tape Drive
Diagnostic or Maintenance Function Function Code
Location of
Instructions
Run Tape Drive Diagnostics
Causes the 3580 Ultrium 2 Tape Drive to run tests to determine
whether it can properly load and unload cartridges, and read and
write data.
1
Page 62
Update Tape Drive Firmware from FMR Tape
Causes the 3580 Ultrium 2 Tape Drive to load updated firmware
from a field microcode replacement (FMR) tape.
2
Page 64
Create FMR Tape
Causes the 3580 Ultrium 2 Tape Drive to copy its field microcode
replacement (FMR) data to a scratch (blank) data cartridge.
3
Page 65
Force a Drive Dump
Causes the 3580 Ultrium 2 Tape Drive to perform a dump of data
(also known as saving a microcode trace).
4
Page 67
Copy the Drive Dump to Tape (at Beginning of Tape)
Causes the 3580 Ultrium 2 Tape Drive to copy data from a drive
dump (captured by using Function Code 4) to the beginning of a
scratch (blank) data cartridge.
5
Page 68
Run SCSI Wrap Test
Causes the 3580 Ultrium 2 Tape Drive to perform a check of the
SCSI circuitry from and to the SCSI connector.
6
Page 69
Run RS-422 Wrap Test
Not available.
7
Not available
Unmake FMR Tape
Causes the 3580 Ultrium 2 Tape Drive to erase the FMR data on a
scratch (blank) data cartridge and rewrite the cartridge memory on
the tape. This turns the cartridge into a valid scratch data cartridge.
8
Page 72
Display Error Code Log
Causes the 3580 Ultrium 2 Tape Drive to display the last 10 error
codes, one at a time (the codes are ordered; the most recent is
presented first and the oldest (tenth) is presented last).
9
Page 73
© Copyright IBM Corp. 2003
59