IBM TotalStorage Ultrium 3580 H23, Руководство по настройке и эксплуатации

Страница: 31 / 149

v
If the 3580 Ultrium 2 Tape Drive Is One of Multiple Devices On the
SCSI Bus:
connect the SCSI bus cable to the next device on the bus, and
move the terminator to the last device on the bus (see Figure 4). The
maximum allowable length of your bus cable depends on the drive
interface:
– For a drive with an LVD SCSI interface, use a cable with a total length
of 12 m (39 ft) or less.
– For a drive with an HVD/DIFF SCSI interface, use a cable with a total
length of 25 m (82 ft) or less.
To determine whether your drive uses an LVD or HVD/DIFF SCSI
interface, see “Step 9. Installing the SCSI Host Adapter Card (if required)”
on page 12.
Attention: Do not mix LVD and HVD/DIFF SCSI host adapters, tape
drives, or terminators on the same bus, as they could become damaged.
1
3580 Ultrium 2 Tape Drive
5
SCSI host adapter card
2
SCSI connectors
6
Server
3
Terminator
7
Another tape device
4
SCSI bus cable
Step 12. Configuring the 3580 Ultrium 2 Tape Drive to the Server
__ 1. Power-on the 3580 Ultrium 2 Tape Drive.
__ 2. To configure the 3580 Ultrium 2 Tape Drive for use, refer to the
documentation for your server and application software.
Figure 4. Example of connecting multiple SCSI devices to the server. The view is from the
top.
Chapter 2. Installing
15