IBM TotalStorage EXP100, Инструкция по установке, использованию и обслуживанию

Страница: 31 / 188

Note:
In addition to the controller firmware and ESM firmware, upgrade the SATA
drive CRUs to the latest drive firmware.
You can find the latest DS4000 controller firmware and NVSRAM, EXP100
expansion enclosure ESM firmware, and Storage Manager software packages at
the IBM DS4000 TotalStorage Support Web site:
www.ibm.com/servers/storage/support/disk/
The software and firmware are also included on the DS4000 Storage Manager
version 9.15 Support for Microsoft Windows 2000, Windows Server 2003 CD that is
shipped with the EXP100. However, always check the Web site to be certain that
you have the latest versions.
Table 3 shows the latest minimum DS4000 controller firmware and ESM firmware
versions that are recommended for use with the EXP100.
Important: To complete an accurate installation and configuration, you must also
read the information in the next section, “EXP100 ESM CRU types,
firmware, and release levels explained” on page 6.
Table 3. Minimum firmware versions recommended for use with the EXP100
DS4000 storage subsystem Controller firmware EXP100 ESM firmware
DS4100, DS4300, DS4400,
DS4500
06.12.1x.xx 956x
DS4800 06.15.16.xx
Notes:
1. All DS4000 storage subsystems are shipped with the 06.12.xx.xx or 06.15.xx.xx
firmware that is required to support EXP100 expansion enclosures. However, to
connect both SATA and Fibre Channel drives in the same DS4000 storage
subsystem, you need to purchase and install the Fibre Channel/SATA Intermix
Premium Feature.
2. DO NOT install controller versions 5.41.5x.xx or 5.41.1x.xx in DS4000 storage
subsystems. The R2 FHA controller firmware version 5.41.5x.xx and the R1
LHA controller firmware version 5.41.1x.xx have been replaced by controller
firmware versions 6.12.xx.xx or higher.
For DS4300 and DS4500 storage subsystems only: If you need to upgrade the
controller firmware from version 05.41.1x.xx to version 06.12.xx.xx, you must first
upgrade the firmware using the required “stepping-stone” version of the controller
firmware, 05.41.5x.xx. You can find these “stepping-stone” controller firmware files
on the DS4000 Storage Manager version 9.15 Support for Microsoft Windows 2000,
Windows Server 2003 CD that is shipped with EXP100, or by contacting your IBM
support representative. On the CD, the firmware files are located in the appropriate
directory for your DS4000 storage subsystem, in the \Controller\05.41.1x_upgrade
directory.
After you install the “stepping-stone” firmware version 05.41.5x.xx, check the
support Web site and upgrade the DS4000 controller to the latest 6.12.1x.xx
firmware version that is posted on the Web site.
Chapter 1. Introduction
5
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|||
|
| ||
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|