IBM ThinkPad R30, Руководство оператора

Страница: 52 / 276

2-32
Operator Guide
Unloading the 8 mm Tape Cartridge
Before performing the unload operation, make sure the power to the 8 mm tape drive is on.
To unload and eject the tape cartridge, press the unload button. The 8 mm tape drive
rewinds the tape and then ejects the tape cartridge from the tape drive.
After pressing the unload button, the following will occur:
1. The ready status light goes off.
2. The busy status light flashs during the unload operation.
3. The busy status light goes off when the cartridge is ejected from the tape drive.
Unload Button
Write-Protect Switch Ready Status Light
(Green)
Busy Status Light
(Green)
8 mm Tape
Cartridge
The time required for a tape to rewind and unload is between 18 seconds and 3 minutes,
depending on the position of the tape when the unload button is pushed.
If the tape cartridge cannot unload and has to be removed manually from the drive, contact
your service representative.