IBM ThinkPad 365X Скачать руководство пользователя страница 219

Страница: 219 / 308

Troubleshooting

Screen Message and Its

Meaning

Action

159

(Supervisor password
error)

The hard disk password differs from the supervisor password.

To solve the problem, do the following:

1. Turn off the computer; then turn it on again.

2. Change the hard disk password to the supervisor password at the hard disk

password prompt.

x or 17x

(Undefined date or
configuration error)

Follow the instructions on the screen.

174

(Device configuration
error)

There is a device configuration error.

Check that the hard disk drive and the other devices are installed firmly in their
connectors.

184

(Invalid password error)

The entered password is invalid. Turn off the computer and wait at least 5
seconds; then turn it on again and type the correct password.

190

(Critical low-battery error)

The computer has turned off because of a critical low-battery condition.

Connect the AC Adapter to the computer and charge the battery pack, or
replace the battery pack with the fully charged one.

195

(Hibernation error)

The system configuration before and after hibernation mode differs, and the
computer cannot resume normal operation.

Change the system configuration to what it was before the computer entered

hibernation mode.

If the memory size is changed, re-create the hibernation file (see page 79).

196

(Hibernation error)

The computer cannot read the hibernation file.

Have the computer serviced.

(Memory error)

Verify that the DIMM option is correctly installed.

Chapter 8. Solving Computer Problems

197

Содержание ThinkPad 365X





















































































































































































































































































































Результаты поиска

Содержание ThinkPad 365X

Отзывы:

Похожие инструкции для ThinkPad 365X

Бренды по названию

Популярные бренды

IBM ThinkPad 365X, Руководство пользователя

Результаты поиска

Содержание ThinkPad 365X

Отзывы:

Похожие инструкции для ThinkPad 365X

Бренды по названию

Популярные бренды