IBM ThinkPad 365X, Руководство пользователя

Страница: 112 / 308

Using Passwords
Setting a Hard Disk Password
Note:
If Initialize in the Config menu,
Password, or Start up functions
cannot be selected when using
Easy-Setup, the supervisor
password is set. You must enter
the supervisor password instead of
the power-on password to use all
Easy-Setup functions.
To set a hard disk password:
1
Start Easy-Setup; then select the Password icon.
To start Easy-Setup, press and hold F1 and turn on the
computer.
2
Select HDD ( ).
Note:
When you type a wrong key, use
the Backspace key to erase it, and
then type the correct key.
3
Type your desired hard disk password; then press Enter.
You can use any combination of up to 7 characters. Use a
combination of any letters or numbers (
A to Z, 0 to 9) in
uppercase (
A) or lowercase (a). Uppercase and lowercase
letters (for example,
A and a) are treated the same.
4
Type your hard disk password again to verify it; then press
Enter.
Do Not Forget Your Hard Disk Password!
Note the password and keep it in a safe place.
If you forget your hard disk password, there is
no way to reset
your password or recover data from the hard disk. Neither
an IBM authorized reseller nor IBM marketing representative can
make the hard disk drive usable.
Once you set the password, you cannot change or remove it in
Easy-Setup; you must change or remove a password at the
password prompt screen that appears when you turn on the
computer. See “Changing a Hard Disk Password” on page 92 or
“Removing a Hard Disk Password” on page 93.
90
IBM ThinkPad 365X/365XD: User's Guide