IBM System Storage, Руководство администратора

Страница: 59 / 94

Chapter 6. Configuring the IBM Network Color Printer
6–19
pertaining to that protocol. You must specify network addresses and names
that will be used by workstations, servers, and the printer when they
communicate with each other.
If the printer is configured to enable more than one protocol, it automatically
switches to the correct protocol when it receives a print request.
Important:
Before entering any Network Setup options, ensure that the
network cable is connected to the printer. During Network setup, the printer
queries the network for zones and servers. If you do the network setup
without the printer being connected to a functioning network, the printer will
use default settings that may not work later. For instructions on cabling the
printer, see the
Installation and Relocation Guide.
Choosing Novell Setup Options
Use the information in this section to choose Novell Setup options.
Notes:.
1. If you have a Novell network, configure the NetWare server that you
want to attach to the printer before you enter Network Setup options.
See “Configuring Your Novell Network” on page 2–1 for instructions.
2. If you are defining connections to more than one NetWare file server,
you must enter all of the options for all of the connections at the
same time. If you have one file server defined and want to add
another one, you will have to define the first server again when you
add the second one.
The following table summarizes Novell network setup options and their
network and operating system implications.
Table 7: Network Setup Options and Client/Server Implications: Novell
Enable Novell Notes
• Select YES if you have a Novell
network. When you select YES, the
printer scans the network for
NetWare file servers.
• If you select NO, skip to “Enable
TCP/IP” on page 6–23.
NetWare
Selecting YES enables the printer to
connect to NetWare file servers and print
servers.
YES (default)
NO
IPX Frametype Notes
Select the Ethernet Frame Type that your
NetWare file server uses.
Ethernet 802.2
(default)
Ethernet 802.3
Ethernet II