IBM System storage DS6000 Series, Руководство по присоединению

Страница: 167 / 298

2. Click Interoperability matrix .
3. Click DS6000 interoperability matrix .
4. Find the section for the current version of the driver and firmware and driver you
want.
5. Go to http://www.qlogic.com
6. Click Drivers / Software from the Quick Links list.
7. Choose IBM from the OEM and ISV approved Drivers and Firmware section.
8. Navigate to the adapter you want to download, then click Download .
Installing the QLogic QLA23xx adapter card for a Novell NetWare host
This section tells you how to attach a storage unit to a Novell NetWare host system
with the QLogic QLA23xx adapter card. Single- and dual-port fibre-channel
interfaces with the QLogic QLA23xx adapter card support the following public and
private loop modes.
v Target
v Public initiator
v Private initiator
v
Target and public initiator
v Target and private initiator
Note: The following steps are an example of a configuration. The configuration for
your adapter might differ.
1. Install the QLogic QLA23xx adapter card in the host system.
2. Connect the cable to the storage unit port.
3. Restart the server.
4. Press Ctrl+Q to get to the FAST!Util menu.
5. Use FAST!Util to set the parameters to the values listed in the following table:
Table 8. Recommended settings for the QLogic QLA23xx adapter card for a Novell NetWare
host
Parameters Recommended settings
Basic Input/Output System (BIOS) Disabled
Frame size 2048
Loop reset delay 5 (minimum)
Adapter hard loop ID Disabled
Hard loop ID 0
Execution throttle 16
Fast command posting Enabled
>4 GB addressing Disabled (for 32-bit systems)
LUNs per target 32
Note: Set LUNs per target to a number
greater than the LUNs you have assigned to
the adapter.
Enable LIP reset No
Enable LIP full login Yes
Enable target reset Yes
Login retry count 20 (minimum)
Chapter 13. Attaching to a Novell NetWare host
137