IBM System storage DS6000 Series, Руководство по присоединению

Страница: 125 / 298

Note: Not all FICON switches support high integrity fabrics. Such switches can only
be used in a single-switch FICON fabric.
With fibre-channel and FICON-intermix mode, both fibre-channel protocol (FCP) and
FICON upper-level protocols can be supported within the same director when
deployed independently by port. (Director ports operate in either fibre-channel or
FICON mode). The storage unit supports the fibre-channel and FICON-intermix
mode on the following directors:
v CNT FC/9000 Fibre Channel Director (IBM 2042 Models 001, 128, and N16).
– Implementation details and operational information for using intermix mode
with the CNT FC/9000 is available at http://www.inrange.com/ibm.
– A list of supported environments (servers, operating systems, adapters) and
hardware and software prerequisites for the CNT FC/9000 is available at
http://www.storage.ibm.com/ibmsan/products/directors/index.html.
v McDATA ED-6064 Enterprise Fibre Channel Director (IBM 2032 Model 001)
– Implementation details and operational information for using intermix mode
with the McDATA ED-6064 is available at http://www.mcdata.com/ibm.
– A list of supported environments (servers, operating systems and adapters)
and hardware and software prerequisites for the McDATA ED-6064 is
available at http://www.storage.ibm.com/ibmsan/products/2032/6064/.
v Brocade 2109-M12 and 2109-M14 Fibre Channel Director
– Implementation details and operational information for using intermix mode
with the Brocade 2109-M12 and 2109-M14 is available at
http://www.brocade.com.
– A list of supported environments (servers, operating systems, adapters) and
hardware and software prerequisites for the Brocade 2109-M12 and
2109-M14 is available at http://www.storage.ibm.com/snetwork/index.html.
v
Cisco MDS 9509 and MDS 9506 Fibre Channel Directors, and MDS 9216 Fabric
Switch
– Implementation details and operational information for using intermix mode
with the Cisco is available at http://www.cisco.com/go/ibm/storage.
– A list of supported environments (servers, operating systems, adapters) and
hardware and software prerequisites for the Cisco is available at
http://www.cisco.com/ibmsan/cisco/index.html.
Registered state-change notifications (RSCNs) on zSeries hosts
This topic provides information about registered state-change notifications (RSCNs)
on zSeries hosts.
McDATA and CNT switches ship without any configured zoning. This unzoned
configuration is also referred to as enabling the default zone on some McDATA
switches. This configuration enables all ports in the switch with a fibre-channel
connection to communicate with each other and receive registered state change
notifications (RSCNs) about each other. You can set the zones. Here are some
recommendations:
v
If you have FICON-only environments, do not disable the default zone.
v If you have FICON environments and plan to add (or already have) fibre-channel
intermix on the switch, ensure that all FICON host adapters and all
FICON-capable device ports are in an explicitly defined common zone.
Chapter 10. Attaching to an IBM S/390 or IBM eServer zSeries host
95