IBM Storwize V7000 Скачать руководство пользователя страница 175

Страница: 175 / 188

1189

The node is held in the service state.

Explanation:

The cluster is reporting that a node is

not operational because of critical node error 690. See
the details of node error 690 for more information.

User response:

See node error 690.

1202

A solid-state drive is missing from the
configuration.

Explanation:

The offline solid-state drive (SSD)

identified by this error must be repaired.

User response:

In the management GUI, click

Troubleshooting

Recommended Actions

to run the

recommended action for this error. Otherwise, use MAP
6000 to replace the drive.

1691

A background scrub process has found
an inconsistency between data and
parity on the array.

Explanation:

The array has at least one stride where

the data and parity do not match. RAID has found an
inconsistency between the data stored on the drives
and the parity information. This could either mean that
the data has been corrupted, or that the parity
information has been corrupted.

User response:

Follow the directed maintenance

procedure for inconsistent arrays.

1189 • 1691

Chapter 9. Event reporting

157

Содержание Storwize V7000





























































































































































































Результаты поиска

Содержание Storwize V7000

Отзывы:

Бренды по названию

Популярные бренды

IBM Storwize V7000, Руководство по устранению неисправностей и техническому обслуживанию

Результаты поиска

Содержание Storwize V7000

Отзывы:

Бренды по названию

Популярные бренды