IBM Storwize V7000 Скачать руководство пользователя страница 148

Страница: 148 / 188

Table 28. Error event IDs and error codes (continued)

Event
ID

Notification
type

Condition

Error
code

009191

A trial of a licensable feature will expire in 10 days.

3084

009192

A trial of a licensable feature will expire in 15 days.

3085

009193

A trial of a licensable feature will expire in 45 days.

3086

009194

Easy Tier feature license limit exceeded.

3032

009195

FlashCopy feature license limit exceeded.

3032

009196

External virtualization feature license limit exceeded.

3032

009197

Remote copy feature license limit exceeded.

3032

010002

The node ran out of base event sources. As a result, the
node has stopped and exited the system.

2030

010003

The number of device logins has reduced.

1630

010006

A software error has occurred.

2030

010008

The block size is invalid, the capacity or LUN identity
has changed during the managed disk initialization.

1660

010010

The managed disk is excluded because of excessive
errors.

1310

010011

The remote port is excluded for a managed disk and
node.

1220

010012

The local port is excluded.

1210

010013

The login is excluded.

1230

010014

The local port is excluded.

1211

010017

A timeout has occurred as a result of excessive
processing time.

1340

010018

An error recovery procedure has occurred.

1370

010019

A managed disk I/O error has occurred.

1310

010020

The managed disk error count threshold has exceeded.

1310

010021

There are too many devices presented to the clustered
system.

1200

010022

There are too many managed disks presented to the
cluster (system).

1200

010023

There are too many LUNs presented to a node.

1200

010024

There are too many drives presented to a cluster
(system).

1200

010025

A disk I/O medium error has occurred.

1320

010026

A suitable MDisk or drive for use as a quorum disk was
not found.

1330

010027

The quorum disk is not available.

1335

010028

A controller configuration is not supported.

1625

010029

A login transport fault has occurred.

1360

130

Storwize V7000: Troubleshooting, Recovery, and Maintenance Guide

Содержание Storwize V7000





























































































































































































Результаты поиска

Содержание Storwize V7000

Отзывы:

Бренды по названию

Популярные бренды

IBM Storwize V7000, Руководство по устранению неисправностей и техническому обслуживанию

Результаты поиска

Содержание Storwize V7000

Отзывы:

Бренды по названию

Популярные бренды