33
IBM SPSS Data Collection Interviewer Server installation information
Ports needed for domains
The following ports must be open in order to establish a domain trust or secure channel across
a
fi
rewall. If there are hosts that have both client and server roles on both sides of the
fi
rewall,
you may need to mirror these rules.
Note:
These lists were obtained from the Microsoft document
How to Con
fi
gure a Firewall for
Domains and Trusts (Q179442)
and have not been tested.
On Windows, the following ports must be open.
Client Port(s)
Server Port
Service
1024-65535/TCP
135/TCP
RPC.
Note:
There are
speci
fi
c requirements for RPC
communications beyond what is
listed in the table. For additional
information about con
fi
guring
RPC communication for a
fi
rewall, refer to the Microsoft
article
Con
fi
guring RPC Dynamic
Port Allocation to Work With a
Firewall.
137/UDP
137/UDP
NetBIOS Name
138/UDP
138/UDP
NetBIOS Netlogon and Browsing
1024-65535/TCP
139/TCP
NetBIOS Session
1024-65535/TCP
42/TCP
WINS Replication
Backing up your system
It is recommended that you back up or make images of all machines on which you will be installing
IBM® SPSS® Data Collection Interviewer Server software before you run the installation
program. This ensures that you will be able to go back to your current setup should anything go
wrong. It also means that it will be easier to add extra machines into the cluster at a later date.
Installation procedures
The installation procedure varies depending on whether you are installing IBM® SPSS® Data
Collection Interviewer Server on a single machine or on more than one machine.
Single machine installation.
When you want to install all of the services onto a single machine, you
install from the DVD-ROM. Note that the Database Service can be located either on the same
machine as Interviewer Server or on a central server.
Multiple machine installation.
A typical installation consists of the following steps:
First, you log in on the Primary DPM server and run the installation from the DVD-ROM
to create a site preparation
fi
le that names the machines on which the various services will
be installed, and to set up a central installation folder on the server that can be used by other
machines in the cluster. When the installation program
fi
nishes, you need to share this folder
manually.
