IBM SelectaDock II, Руководство пользователя

Страница: 108 / 168

Visible Problems
Problem Action
Hardware, such as the
cover, is broken. When hardware is broken, have the docking station serviced.
See the warranty statement on page 144 for any service
charge that may be incurred if the problem was caused by
improper use.
You cannot undock the
computer. Follow the procedure “Cold Docking and Undocking” on
page 26. When no electricity is applied to the SelectaDock
system, undocking can be done mechanically. If removal is
very difficult, have the SelectaDock system serviced.
The Attention indicator is
lit or blinking. The system uses security features to detect inappropriate
docking or undocking operation to prevent further problems.
1. Verify that the computer to be docked is a supported
model. The computer must use PCI architecture. If you
are not sure about the architecture of the computer, see its
user's guide. The following ThinkPad models are
supported:
760E, 760EL, 760ED, 760ELD
2. If this indicator comes on when you turn the security key to
the eject position, verify that the computer is performing
some tasks that would be abnormally terminated if
undocking is done. See “Hot or Warm Docking and
Undocking” on page 28 for the procedure.
3. If this indicator comes on when you install a drive in the
UltraBay, verify that the drive is supported by the docking
station.
4. Verify that no more than two IDE devices are installed.
The security lock key is
missing, or you need extra
keys. See the SelectaDock Base Model I Setup Guide for ordering
instructions.
Your computer does not
suspend or resume while
in docked status. Check if any adapter card is inserted in a card slot. Suspend
and resume functions are not supported under this condition.
96
IBM ThinkPad SelectaDock II User's Guide