IBM SelectaDock II, Руководство пользователя

Страница: 98 / 168

Yes The problem is possibly caused by your computer.
Refer to the user's guide of your computer to further
analyze the problem.
No The problem occurs only when the computer is docked.
Go to the next step.
6
To isolate further, remove your SelectaDock base from the
docking station.
7
Dock your computer to the SelectaDock base and reconnect the
all external devices to the SelectaDock base. (See the
SelectaDock Base Model I Setup Guide, which was shipped with
your SelectaDock base.)
8
If you can, test your computer by running the same jobs that
created your problem. Did the same problem remain?
Yes The SelectaDock base is causing the problem. Refer to
the
SelectaDock Base Model I Setup Guide to resolve
the problem.
No Go to the next step.
If you cannot run the same job that created your problem, go to
the next step.
9
You are here because your problems occur only when you use
the computer docked into the docking station. Dock your
SelectaDock base and the computer to the docking station.
(See “Cold Docking and Undocking” on page 26.) Connect the
ac power cord to the docking station, but do not try to turn on
power yet.
10
Did the docked indicator on the docking station panel turn on?
Yes The docking station detected that your computer is
docked. Go to the next step.
No Your computer is not docked correctly. Go to “Setup
Problems” on page 97, and take the corrective actions
provided.
11
Turn on the external devices, and then the computer.
86
IBM ThinkPad SelectaDock II User's Guide