IBM SelectaDock II, Руководство пользователя

Страница: 66 / 168

Installing or Removing the PCI/ISA Adapter Card
The docking station can accommodate two sets of a full-size, 16-bit
ISA bus adapter card or a 32-bit PCI bus adapter card. The lower
socket is for an ISA bus adapter card, and the upper socket is for a
PCI bus adapter card.
In addition, the docking station can accommodate another half-size
32-bit PCI bus adapter card.
Thus, the docking station can accommodate any of the following
combinations of PCI and ISA adapter cards:
3 PCI adapter cards
2 PCI adapter cards and 1 ISA adapter card
1 PCI adapter card and 2 ISA adapter cards
This section describes the procedures for installing and removing an
adapter card.
Installing an Adapter Card
To install an adapter card in the docking station, do the following:
1
Turn off the computer and remove the power cord from the
docking station.
2
Undock the computer from the SelectaDock system.
3
Remove all cables from the rear of the SelectaDock system for
easy access to the adapter slot.
4
Unlock the MicroSaver lock, if installed.
5
Turn the security key to unlock.
6
Remove the SelectaDock base.
7
Open and remove the rear cover.
54
IBM ThinkPad SelectaDock II User's Guide