IBM SelectaDock II, Руководство пользователя

Страница: 33 / 168

9
Ensure a good connection by eliminating any gap between the
connectors as shown. If you see a gap, close it by pressing
firmly on the areas indicated by the two arrows until the triangles
on the SelectaDock base and the docking station face each
other.
10
Attach the connector cover to the docking station by inserting the
hooks into the holes on the cover.
This completes the attachment of the SelectaDock base to the docking
station.
Removing the SelectaDock Base from the Docking Station
To remove the SelectaDock base from the docking station, do the
following:
1
Remove the connector cover from the docking station by pulling
out the hooks from the holes on the cover.
2
Detach all peripheral cables from the rear of the SelectaDock
base. Detach the ac power cord from the docking station.
3
Make sure the security key is set to the unlock position
1
.
4
Slide down the SelectaDock base lock to release the
SelectaDock base.
Chapter 2. Using the SelectaDock System
21