manualshive.com logo in svg

IBM SelectaDock II, Руководство пользователя

Поделиться
Скачать
IBM SelectaDock II Скачать руководство пользователя страница 10

 

DANGER:

The power cord must be used with a properly grounded outlet.

Electrical current from power, telephone, and communication
cable is hazardous.  To avoid shock hazard, connect and 
disconnect cables as shown below when installing, moving, or
opening the covers of this product or attached the devices.

Turn everything OFF.

Turn everything OFF.

First, attach all cables to devices.

First, remove the power cord from
the outlet.

Attach the signal cables to
receptacles.

Remove signal cables from 
receptacles.

Attach the power cord to an outlet.

Remove all cables from devices.

Turn the device ON.

Note: In the U.K., by law, the
telephone line cable must be
connected after the power cord.

Note: In the U.K., by law, the
power cord must be disconnected
after the telephone line cable.

To Connect

To Disconnect

viii

IBM ThinkPad SelectaDock II User's Guide 

 

Содержание SelectaDock II









































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды