IBM SAN Volume Controller 2145-CG8, Руководство по установке оборудования

Страница: 9 / 110

Safety and environmental notices
Review the multilingual safety notices for the IBM
®
Systems Storage SAN Volume
Controller, redundant ac-power switch, and the uninterruptible power supply
before you install and use the product.
Suitability for telecommunication environment: This product is not intended to
connect directly or indirectly by any means whatsoever to interfaces of public
telecommunications networks.
To find the translated text for a caution or danger notice:
1. Look for the identification number at the end of each caution notice or each
danger notice. In the following examples, the numbers (C001) and (D002) are
the identification numbers.
CAUTION:
A caution notice indicates the presence of a hazard that has the potential of
causing moderate or minor personal injury. (C001)
DANGER
A danger notice indicates the presence of a hazard that has the potential
of causing death or serious personal injury. (D002)
2. Locate IBM System Storage SAN Volume Controller Safety Notices with the user
publications that were provided with the SAN Volume Controller hardware.
3. Find the matching identification number in the IBM System Storage SAN Volume
Controller Safety Notices . Then review the topics concerning the safety notices to
ensure that you are in compliance.
4.
Optionally, read the multilingual safety instructions on the SAN Volume
Controller website. Go to the www.ibm.com/storage/support/2145 and click
the documentation link.
General safety
When you service the SAN Volume Controller, redundant ac-power switch, or the
uninterruptible power supply, follow general safety guidelines.
Use the following general rules to ensure safety to yourself and others:
v
Observe good housekeeping in the area where the devices are kept during and
after maintenance.
v
Follow the guidelines when lifting any heavy object:
1. Ensure that you can stand safely without slipping.
2.
Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you attempt to
lift.
4. Lift by standing or by pushing up with your leg muscles; this action removes
the strain from the muscles in your back.
Do not attempt to lift any objects that
weigh more than 18 kg (40 lb) or objects that you think are too heavy for you.
v Do not perform any action that causes a hazard to the customer, or that makes
the equipment unsafe.
© Copyright IBM Corp. 2012
ix