IBM pSeries 650, Руководство по установке

Страница: 89 / 190

6. Turn over the cassette so that the cover is facing up, as shown in the following illustration. Remove the
cover from the cassette as follows:
a. Slide the cover until it releases from the cassette assembly.
Attention: The cover might be tight and difficult to slide. If you grasp the left end (handle end) of
the cassette and the right end of the cover, you can use enough force to pull the cover off the PCI
adapter cassette assembly.
1 Left End of the Cassette
2 Cassette Cover
b. Lift the cover off the assembly, and set it aside.
c. By pulling on both sides of the locking bar, which is located on the handle, ensure that the locking
bar is pulled into the unlocked position. Raise the handle on the cassette linkage assembly until it
locks into the up position (the blank filler or adapter moves downward).
1 Handle
2 Locking Bar
Chapter 5. Installing Options
73