IBM pSeries 650, Руководство по установке

Страница: 42 / 190

To connect the power cords to the server, do the following:
1. Plug the power cords into the power supply connectors.
2. Route the power cords through the cable-restraint bracket.
1
2
1 Power Cords
2 Power Supply Connectors
For more information about cabling, refer to Appendix E, “Subsystem Positioning and Cabling,” on page
137.
Step 18. Route the Cables
To route the cables, do the following:
1. Route the mouse cable and keyboard cable through the cable-restraint bracket.
2. Route all cables through the cable-management arm, attaching the cables to the arm with the hook
and loop fastener strips. The wraps are provided for additional cable management.
26
Eserver
pSeries 650 Installation Guide