IBM pSeries 650, Руководство по установке

Страница: 66 / 190

8. Select Remove a Disk .
9. Select the desired disk from the list on the screen and press Enter.
10. Follow the instructions on the screen to remove the drive.
11. When you are asked
″
Are you sure?
″
answer “Yes” and press Enter. The power LED on the drive that
you selected turns off.
12. Remove the disk drive by pulling the disk drive lever toward you until it is completely open. Then
remove the disk drive from the slot. The LED on the top of the slot will turn off when the disk drive is
removed.
1 Disk drive bay
2 Disk drive
13. Repeat steps 1 through 12 in “Removing Hot-Plug SCSI Disk Drives” on page 49 for all the drives
that you are removing from this bay. Then replace the cover on the bay.
14. Press F10 to exit smitty.
1
2
50
Eserver
pSeries 650 Installation Guide