IBM pSeries 650, Руководство по установке

Страница: 160 / 190

Hardware Management Console for pSeries (HMC) to the HMC
Connector
To connect your HMC to the pSeries 650 Model 6M2, connect a serial cable into a serial port on the HMC.
The port can be either a serial port on the back of the HMC or a serial port on an 8-port or 128-port async
adapter. Connect the other end of the serial cable into the HMC1 connector located on the rear of the
processor subsystem. The following illustration shows the location of the serial ports on the back of the
HMC and the HMC connectors located on the processor subsystem.
1 HMC (HSC) Port 1,
Location: U0.1-P2/S5
2 HMC (HSC) Port 2,
Location: U0.1-P2/S6
3 HMC
Optional 8-Port or 128-Port Async Adapters
Up to two optional async adapters can be installed in the HMC. The adapters have breakout boxes that
allow connection to serial cables that connect to the managed system’s HMC ports.
144
Eserver
pSeries 650 Installation Guide