IBM pSeries 650, Руководство по установке

Страница: 24 / 190

Before You Begin
To ensure that all of the installation steps are complete, the installer should use the following installation
checklists during the installation process. The customer’s choice of system console options and partition
configurations determines which of the following checklists to use. At the appropriate points in the
installation steps, you will be referred to the applicable checklist.
Note: If the system you are installing will be managed by an HMC, and the HMC is not installed and
functional, see the IBM Hardware Management Console for pSeries Installation and Operations
Guide , order number SA38-0590, for instructions on installing the HMC. Install the HMC, then return
here and continue with this procedure.
v “TTY Terminal Console and the System is Not Partitioned” on page 39
v
“Graphics Terminal Console and the System is Not Partitioned” on page 40
v “HMC-Managed System Using a Single Full System Partition” on page 41
v
“HMC-Managed System with Multiple Partitions” on page 42
Step 1. Check Your Inventory
Use the packing lists for each ship group to verify that you have all the items shipped with the system.
h
Books, CD-ROM and Other Media
h
″
About Your Machine
″
Document
h
Power Cables (1 standard, 2 optional)
h
9-Pin to 25-Pin Serial Converters (2) (optional)
h
RJ48 to D-Shell Converter Cable (1)
h
ASCII Terminal or System Console Display
(optional)
8
Eserver
pSeries 650 Installation Guide