v
If any FRUs are marked for block replacement, replace all FRUs in the block replacement group at
the same time.
Complete the following steps:
a.
Record the reference code if available.
b.
Record the error details.
c.
Run the
sosreport
command to collect debug data.
d.
Contact your service provider.
This ends the procedure.
4.
Was a disk drive, solid-state drive, media device, or I/O adapter replaced when the system was
powered off?
v
Yes:
Perform Running diagnostics on an IBM PowerKVM system. This ends the procedure.
v
No:
Continue with the “Closing a service call” on page 178 procedure. This ends the procedure.
Verifying the repair from the management console
Perform these procedures to close problem numbers, clear hardware messages, and prepare the server to
return to the customer by using the management console.
Follow this checklist before performing the procedures:
v
You return the server to the state that the customer normally uses, such as IPL type, IPL mode, and the
way the system is configured or partitioned.
v
While you were performing the problem analysis on the original serviceable event, other
serviceable-event numbers might have been opened. Close all serviceable events that were opened as a
result of your service activity.
v
Server verification has been performed and there are no problems that require additional service
actions.
v
If the repair was done by using the HMC online repair procedures, ensure that the original serviceable
event is now closed.
1.
Is a management console used to manage the server that you are servicing?
v
Yes:
Continue with the next step.
v
No:
Return to the “Verifying a repair” on page 170. This ends the procedure.
2.
Are you closing a service event that was a repair on the management console personal computer?
v
Yes:
Continue with the next step.
v
No:
Go to step 4.
3.
Power on the management console. Did the power-on process complete without errors?
v
Yes:
Ensure that the management console can be used to perform server management tasks, and
return the management console to normal operations. Go to “Closing a service call” on page 178.
This ends the procedure.
v
No
: Go to the HMC isolation procedures. This ends the procedure.
4.
Log into the management console as the service representative. If invalid user or invalid password is
displayed, get the correct login information from the system administer.
a.
If logged into the System Manager, select Exit from the Console, located in the System Manager
window.
b.
Log in to the System Manager with the following:
v
User identification -
service
v
Password -
service mode
5.
View Serviceable Event Details.
a.
In the navigation area, click Service Applications.
b.
In the navigation area, click Service Focal Point.
Common procedures for removing and replacing the system backplane
177
Содержание Power Systems 8247-42L
