IBM Power System S821LC, Установка

Страница: 95 / 132

g. Place the PCIe adapter riser and the cards it contains into the system backplane as shown in
Figure 49.
1) Ensure that the PCIe holder release pins (B) are retracted, so the arrows point into the system.
2) Use the alignment pins (A) and slots to help you properly insert the riser cards and replace the
cover
3) Reset the retaining pins to secure the PCIe cage.
h. If the riser contains a GPU, replace the power cable (A) into the system backplane.
Figure 48. Inserting an adapter into position 4 or 5 of the riser
Figure 49. Replacing the PCIe riser
Installing and configuring the system
79