IBM Power System S821LC, Установка

Страница: 40 / 132

Table 6. PCIe slot locations and descriptions for the 8001-12C or 8005-12N system
Slot Description
PCI host bridge
(PHB)
Adapter size
Coherent Accelerator
Processor Interface
(CAPI)
1 (UIO Network) 4-ports 10 networking
card, x8 Processor Module 1,
PHB0 Riser No
2 (UIO Slot1) PCIe3 x16 Processor Module 1,
PHB0 Half-height,
half-length, internal Yes
3 (PLX Slot1) PCIe3 x8 Processor Module 1,
PHB0 Half-height,
half-length No
4 (WIO Slot1) PCIe3 x16 Processor Module 2,
PHB1 Full-height,
full-length Yes
5 (WIO Slot2) PCIe3 x16 Processor Module 2,
PHB1 Full-height,
full-length Yes
PCIe adapter placement rules
Use this information to select slots for installing PCIe adapters in the 8001-12C or 8005-12N system.
Table 7 provides information about the adapters, the slot priorities in the system they are supported on,
and the maximum number of adapters that can be installed in the supported system. You can click the
link that appears in the feature code column for more technical information specific to the PCIe adapter.
Table 7. PCIe adapters supported in the 8001-12C or 8005-12N system
Feature code Description
8001-12C (slot
priority) 8005-12N (slot
priority)
Maximum number
of adapters
supported
EKA0 PCIe3 x4 Intel x550 10GBase-T
Converged Network Adapter
with Dual RJ45 Ports (Adapter
FRU number: AOC-STGS-I2T)
v PCIe2.1 x8
v Short, low-profile
v Direct Cache Access (DCA)
to avoid cache misses
v TCP/UDP Segmentation
Offload
v OS support: Linux
operating systems
3, 4, 5 NA 3
Figure 21. Rear view of an 8001-12C or 8005-12N system with PCIe slots indicated
24
Power Systems: Installing the IBM Power System S821LC (8001-12C)