IBM PCI Dual Channel Ultra2 SCSI Adapter, Инструкция по установке и эксплуатации

Страница: 30 / 50

Connecting Internal or External Devices
While your system is shut down, perform the following:
To connect external devices:
Ÿ
Connect the internal, 68-position, high-density plastic D-Shell VHDCI to P shell
converter cable or the host to device cable with VHDCI connectors on both ends
to an external port Channel A (J2) or Channel B (J3). Use the fastening screws
on the cable connector to securely attach the connector to the adapter.
Ÿ
Connect the other end of the converter cable to the cable attached to a
single-ended SCSI device or subsystem.
Ÿ
Connect the other end of the VHDCI to VHDCI cable to the LVD SCSI
subsystem.
Ÿ
If necessary, connect additional cables to additional SCSI devices.
Ÿ
When all devices are connected, ensure that a SCSI terminator is attached to the
last device.
Ÿ
Turn on both your system unit and your display and any external devices.
Follow any instructions on the screen.
To connect internal devices:
Ÿ
Attach 16-bit cable to the adapter and the 6 position backplane.
Ÿ
Connect the adapter end of the internal cable to the correct internal connector on
the PCI Dual Channel Ultra2 SCSI Adapter. Use either connector Channel B
(J4) or Channel A (J6).
Ÿ
When completed, refer to your system unit User's guide to put covers on and
power on the system unit and all other attached devices.
Note: All the connectors are built so they can only be plugged in one way.
5-2
PCI Dual Channel Ultra2 SCSI Adapter Installation and User's Guide