IBM PCI Dual Channel Ultra2 SCSI Adapter, Инструкция по установке и эксплуатации

Страница: 26 / 50

g. Move the cursor until the fileset names and type:
devices.pci.ðð1ððbðð
h. Press Enter to start the SPOT update. This operation can take up to
15 minutes.
i. Repeat steps "g" and "h" for all device drivers you have selected.
devices.pci.ðð1ðð1ðð
devices.pci.ðð1ððfðð
devices.common.IBM.scsi
Proceed to section “Install Device Drivers on the SP System Nodes.”
Install Device Drivers on the SP System Nodes
1. Make sure that the lppsource directory is exported to the Nodes by typing:
showmount -e
The result should be something of the form:
/spdata/sys1/install/AIX433/lppsource (everyone)
2. If the directory is not exported, you may temporarily export the directory by
typing:
exportfs -i /spdata/sys1/install/
<
lppsoruce_name
>
/lppsource
3. NFS Mount the lppsource directory by typing:
dsh mount
<
controlwks
>
:/spdata/sys1/install/<lppsource_name>/lppsource /mnt
<
controlwks
>
is the name of the Control Workstation known for the Nodes.
<
lppsource_name
>
is the name you recorded earlier in section “Check System
Pre-Requisites” on page 4-1.
4. Perform a preview of the files to be installed on the nodes by typing:
dsh "installp -p -acgqXd /mnt device driver 2>| more
device driver
is the filesets that must be installed for the adapter. The list
includes:
devices.pci.ðð1ððbðð
devices.pci.ðð1ðð1ðð
devices.pci.ðð1ððfðð
devices.common.IBM.scsi
4-6
PCI Dual Channel Ultra2 SCSI Adapter Installation and User's Guide