IBM PC 300GL Types 6275, Руководство по установке

Страница: 83 / 94

Changing Settings and Exiting
In the Configuration/Setup Utility menus, you can accept the configuration changes
by viewing and saving the changes, or you can make manual changes and then save
the settings.
The following is a quick reference for identifying symbols in the
Configuration/Setup Utility program. For information on the function of keys, see
Using Your Personal Computer.
Ÿ
If a bullet ( Ÿ ) is beside a menu item, then an additional menu is available.
Ÿ
Most information enclosed in brackets ([ ]) can be changed. You cannot change
information that is not surrounded by [ ].
Ÿ
A right arrowhead ( 5 ) beside a menu item indicates that a configuration change
occurred in that category. The 5 might also appear in subsequent menus.
Ÿ
If an asterisk (*) is beside a menu item, then a resource conflict is detected.
When you complete your changes or finish viewing information, return to the
Configuration/Setup Utility menu and select Save Settings to save the changes.
From this location, you can exit the Configuration/Setup Utility program.
To exit from the Configuration/Setup Utility program, follow these steps:
1
From the Configuration/Setup Utility menu, press Esc.
2
The Exit Setup menu appears. You can save your changes, exit from the
Configuration/Setup Utility program without saving your changes, or return
to the Configuration/Setup Utility menu. Use the arrow keys to select the
desired option and press Enter.
Chapter 7. Completing the Installation
69