IBM PC 300GL Types 6275, Руководство по установке

Страница: 19 / 94

Chapter 2. Preparing to Install and Remove Options
This chapter provides instructions for locating the options you want to install or
remove.
Disconnecting Cables and Removing the Cover
Before you begin
Ÿ
Read “Electrical Safety” on page 3 and “Handling Static-Sensitive Devices”
on page 4.
Ÿ
Remove any media (diskettes, compact discs, or tapes) from the drives, and
then turn off all attached devices and the computer. For more information
on removing media, see Using Your Personal Computer.
1
For models equipped with a cover lock, make sure it is unlocked.
2
Disconnect all cables attached to the computer; this includes power cords,
cables or lines connected to the input/output (I/O) ports.
3
Remove the cover screw from the rear of the computer. Slide the cover
approximately 19 mm (0.75 in.) toward the front of the computer, and lift it
off. The following illustration shows the cover being removed from a 4-bay
design.
Cover Screw
Note: Although your computer might differ from the one shown above, the
removal of the cover works the same for the different computer
models.

Copyright IBM Corp. 1996, 1997
5