IBM PC 300GL Types 6275, Руководство по установке

Страница: 63 / 94

Removing a 5.25-Inch Drive from the 3-Bay Design
Before you begin
Ÿ
Read “Electrical Safety” on page 3 and “Handling Static-Sensitive Devices”
on page 4.
Ÿ
Obtain a static-protective package to store the drive you remove.
Ÿ
Turn off the computer and all other connected devices.
Ÿ
Disconnect all cables attached to the computer and remove the computer
cover (see “Disconnecting Cables and Removing the Cover” on page 5).
1
Disconnect the cables attached to the drive in bay 1.
2
Remove the bracket that houses bays 1 and 2 by removing the screws at the
front and sliding the bracket backwards to clear the alignment slots. Lift the
bracket from the computer.
Alignment
Slots
Screws
Alignment Slots
3
Disconnect the cables attached to the drive in bay 2.
4
Loosen and remove the four screws and then remove the drive.
Chapter 5. Working with Internal Drives
49