IBM Netfinity 6000R, Руководство пользователя

Страница: 50 / 218

36
IBM® Netfinity® 6000R User’s Reference
• Security Manager
• Serial Connection Control
• Service Configuration Manager
• Service Processor Manager
• Service Manager
• Software Inventory
• System Diagnostics Manager
• System Information Tool
• System Monitor
• System Partition Access (requires System Partition)
• Update Connector Manager (available only on systems running Windows
NT 4.0 or later)
• System Profile
• Web Manager Configuration (installed only if the Netfinity Manager
Installation with Web Enhancement installation configuration is selected)
Note: The graphical user interface (GUI) program files for DMI Browser, ECC
Memory Setup, System Partition Access, RAID Manager, and Predictive
Failure Analysis will be installed regardless of whether the system has a
DMI Service Layer, ECC Memory, a System Partition, a RAID adapter, or
a PFA-enabled disk drive. This enables a network administrator to
remotely access these services on other systems within a network.
However, the installation program installs the base program that enables
local use of the service only if the required hardware or system
configuration is present.
9. Configure the Network Drivers.
If the installation configuration allows for network access, enter information
regarding the communication protocols that are supported by the system. The
Network Driver Configuration window will appear.
Follow these steps to continue configuring the system:
a. Enter a System Name.