IBM Netfinity 6000R, Руководство пользователя

Страница: 20 / 218

6
IBM® Netfinity® 6000R User’s Reference
• Error codes and messages
• Integrated service processor subsystem provides control for remote system
management
• Light Path Diagnostics™ (LED panel)
• Processor serial number access
• Standard cables present detection
• Standby voltage for system management features and monitoring
• System error logging (POST and Netfinity Advanced System Management
Processor)
• Vital Product Data (VPD) on microprocessors, system board, power supplies,
hot-swap-drive backplane, and power backplane
• Customer support center 24 hours per day, 7 days a week
1
Start your server
Use the following procedure to start your server.
1. Turn on all external devices, such as the monitor.
Note: After you plug the power cords into outlets, wait 20 seconds before
pressing the power-control button. During this time, the system-
management processor is initializing and the power-control button does
not respond.
2. Press the power-control button on the front of the server. The power-on light
comes on and the power-on self-test (POST) begins.
The server can be turned on in several ways:
• You can press the power-control button on the front of the server to turn on the
server.
Note: If you have just plugged the power cords of your server into an
electrical outlet, you will have to wait approximately 20 seconds before
pressing the power-control button.
• If the server is turned on and a power failure occurs, the server will start
automatically when power is restored.
• The Netfinity Advanced System Management Processor also can turn on the
server.
1.Service availability will vary by country. Response time will vary depending on the number and nature of incoming calls.