IBM Netfinity 6000R, Руководство пользователя

Страница: 110 / 218

96
IBM® Netfinity® 6000R User’s Reference
Statement 8
CAUTION:
Never remove the cover on a power supply or any part that has the following label
attached.
Hazardous voltage, current, and energy levels are present inside any component
that has this label attached. There are no serviceable parts inside these components.
If you suspect a problem with one of these parts, contact a service technician.
Statement 6
CAUTION:
If you install a strain-relief bracket option over the end of the power cord that is
connected to the device, you must connect the other end of the power cord to an
easily accessible power source.
Installing a Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit
You can install an optional Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit in your
server to connect three additional hot-swap hard disk drives to your server. This kit
contains a hot-swap hard disk drive backplane that you install adjacent to the
standard hot-swap hard disk drive backplane. Your server supports a maximum of
two hot-swap drive backplanes.
Notes:
1. In addition to the optional hot-swap drive backplane, the Netfinity 3-Pack
Ultra160 Hot-Swap Expansion Kit comes with a hard disk drive cage. Do not
install the hard disk drive cage on your server, as the hard disk drive cage is not
compatible with the Netfinity 6000R server. The Netfinity 3-Pack Ultra160 Hot-
Swap Expansion Kit can be installed in various types of Netfinity servers; the
hard disk drive cage is used with other types of servers.