IBM Netfinity 6000R, Руководство пользователя

Страница: 102 / 218

88
IBM® Netfinity® 6000R User’s Reference
8. Installing or removing DIMMs changes the configuration information in the
server. Therefore, after installing or removing a DIMM, you must save the new
configuration information using the Configuration/Setup Utility program. When
you restart the server, the system displays a message indicating that the memory
configuration has changed. Start the Configuration/Setup Utility program and
select Save Settings. See “Chapter 3. Configuring your server,” on page 13 for
more information.
Install the DIMMs in the order provided in Table 6.
The following illustration shows how to install memory on the memory board.
Note: The illustrations in this document might differ slightly from your hardware.
Before you begin:
• Review “Before you begin” on page 71.
• Read the documentation that comes with your option.
To install a DIMM:
Attention: When you handle Electrostatic Discharge-Sensitive devices (ESD), take
precautions to avoid damage from static electricity. For details on handling these
devices, refer to the following Web site and search for ESD: http://www.ibm.com
Bank of 4 DIMMs Install DIMMs in these connectors:
Bank 1 (shipped as standard) J1, J5, J9, J13
Bank 2 J2, J6, J10, J14
Bank 3 J3, J7, J11, J15
Bank 4 J4, J8, J12, J16
Table 6. DIMM installation order
Memory slot 1
Memory slot 5
Memory slot 9
Memory slot 13
Error LEDs
Error LEDs