IBM International ISDN, Руководство пользователя

Страница: 211 / 244

Appendix D: Troubleshooting and Frequently Asked Questions
ISDN PC Card – 18 Appendix D: Troubleshooting and Frequently Asked Questions 211
3. If you have already installed the IBM International ISDN
PC Card, then click “Start / Programs / cFos ISDN & DSL
Driver” and select “Configure cFos”. In the cFos configu-
ration program, select the menu command “Configure
COM ports”. In the list of available COM ports, deacti-
vate the one you want to use for your analog modem.
Click “OK”, then “Exit”. When asked whether you want
to save the changes, click “Yes”. In the last dialog, click
“OK”. Restart your computer if necessary.
When following the instructions above to make a certain
COM port available for your analog modem, make sure that
the COM port you release is not currently used by one of
cFos’s emulated modems. You can verify this by clicking
“Start / Settings / Control Panel / Modems”. Furthermore,
make sure that your Dial-Up Network connections are not us-
ing this COM port.
Windows 9x, Windows Millennium Edition
After I installed the IBM International ISDN PC Card in
Windows 95, I reinstalled CardWizard(TM) for Windows 95.
Now the adapter is not properly recognized any more. What
can I do?
The device driver installation instructions for Windows 95
state:
Some notebook manufacturers install PCMCIA support soft-
ware such as SystemSoft's® CardWizard(TM) as part of the
Windows 95 package. IBM includes this program with its
ThinkPad notebook series. This section briefly describes
how to remove CardWizard(TM) from the system. This soft-
ware must be removed to ensure correct operation of the IBM
International ISDN PC Card.