IBM International ISDN, Руководство пользователя

Страница: 143 / 244

Using AOL
ISDN PC Card – 11 Implementations of the IBM International ISDN PC Card 143
11.4 Using AOL
In order to be able to use AOL with your IBM International
ISDN PC Card, you must have cFos installed, unless you plan
to use only the CAPI 2.0-compliant AOL 5.0 or higher access
software on your system. In this case you may not need to
install cFos.
This section is based on Windows 9x. At the time of writing,
there was no AOL access software available for Windows NT
4.0 or Windows 2000, so that AOL use could not be tested.
Please ask your local AOL help desk what communication
protocol is used for dial-in. In Europe the X.75 protocol is
widely used.
IBM has tested the AOL 4.0 and higher access software.
11.4.1 AOL 4.0 and Other non-CAPI 2.0-compliant AOL
Access Software
AOL 4.0 or a non-CAPI 2.0-compliant AOL access software
version may only detect modems assigned to COM ports 1 to
4. It is strongly recommended that you configure cFos to use
COM4.
Note : The screen shots in this section may vary somewhat
from the user interface you see on your screen.
Before you can use AOL 4.0 or any non-CAPI 2.0-compliant
AOL access software, you must configure cFos for use with it
by installing either the “cFos ISDN, X.75, Defaults, Mailbox
Settings” or the “cFos ISDN, CompuServe” modem emula-
tion on either COM3 or COM4.
When you perform a fresh installation of the AOL 4.0 access
software or a non-CAPI 2.0-compliant AOL dialer software, or
when you reconfigure the already installed AOL dialer, select
the option to “Begin automatic setup”. The AOL software
then searches for an installed modem. When the search is
completed, AOL announces it has found a modem as illus-
trated below.