IBM International ISDN, Руководство пользователя

Страница: 182 / 244

Installation
182 ISDN PC Card – 13 Using NDIS
•
A PC with the Windows NT 4.0 operating system
•
A fully installed ISDN adapter with CAPI 2.0 driver (see
the installation instructions in the ISDN adapter manu-
al)
•
A diskette (or CD) with the NDIS WAN CAPI Driver for
Windows NT
The exact procedure for installing the NDIS WAN CAPI Driver
depends on the network components already installed on
your computer. To illustrate some of the different require-
ments possible, two basic configuration examples are pre-
sented here:
1. You have not yet installed a network, and must there-
fore perform a complete network installation including
the NDIS WAN CAPI Driver and RAS (see Section 13.2.1.1
on page 185).
2. You have already installed a network, and need to add
only the NDIS WAN CAPI Driver and RAS components
(see Section 13.2.1.2on page 185 ).
13.2.1.1 Complete Network Installation
•
Open the Start menu and click “Settings”, then “Control
Panel” Double-click the “Network” icon. If no network
has been installed, you are prompted to do so now.
Click “Yes” to start the installation.
•
Select the option “Wired to the Network”, then click
“Next”.
•
Now you must install a network adapter. The NDIS WAN
CAPI Driver for Windows NT makes your ISDN adapter
funtion as a network adapter! In the next dialog, click
“Select from list” The dialog “Select Network Adapter”
opens. Click “Have disk”.
•
Insert the diskette containing the NDIS WAN CAPI Driver
for Windows NT into the disk drive, and confirm the
path to this drive.