IBM IntelliStation M Pro 6219, Руководство по установке

Страница: 40 / 96

Rear
adapter
retention
bracket
Expansion
slot cover
Front
adapter
retention
bracket
Adapter
13 94
9. Connect required cables to the adapter. Route cables so that they do not block
the flow of air from the fans. If you are installing an optional SCSI adapter, see
“Cabling an optional SCSI adapter” for additional information.
10. If you have another adapter to install, repeat steps 1 through 9.
11. If you have installed a full-length adapter, rotate the front adapter-support
bracket to the closed (locked) position.
Note: If any adapter in your computer is large or has heavy cables attached to
it, you can secure the adapter with a screw: insert one backup
expansion-slot screw (stored next to slot 1) through the top of each
adapter bracket into the screw hole and secure the adapter before
proceeding to the next step.
12. Reinstall the rear adapter-retention bracket; then, rotate the bracket to the
closed (locked) position.
Note: The rear retention bracket rests against the computer side cover. You
might find it easier to lay the computer on its side to replace the side
cover.
13. If you have other options to install, do so now; otherwise, replace the side
cover (see “Replacing the side cover” on page 30), reconnect the external
cables and power cords, and turn on the computer. Then, go to “Completing
the installation” on page 29.
Cabling an optional SCSI adapter
You can install an optional SCSI adapter in your computer to control the internal
hard disk drives. With a SCSI adapter installed, you can configure the internal hard
disk drives into disk arrays. You can also cable a SCSI adapter to external hard
disk drives. See your SCSI adapter option documentation for complete instructions
for installing a SCSI adapter in your computer and for additional information about
SCSI adapters.
20
IBM IntelliStation M Pro Type 6219: Installation Guide