IBM IntelliStation M Pro 6219, Руководство по установке

Страница: 50 / 96

Replacing the side cover
If you removed the support bracket, reinstall it before you replace the side cover.
See “Removing and installing the support bracket” on page 18.
Note: The rear adapter retaining bracket rests against the computer side cover.
You might find it easier to lay the computer on its side to replace the side
cover.
Complete the following steps to replace the side cover:
1. Before installing the cover, check that all cables, adapters, and other
components are installed and seated correctly and that you have cleared all
work tools from inside the computer.
2. Install the side cover by placing it into position on the computer. Be certain the
tabs on the underside of the cover match up to the holes along the sides of the
computer. Press down on the cover-release latch as you slide the side cover
forward to lock the side cover.
13 94
3. If you have not done so already, ensure that the two front stabilizing feet are
rotated outward so that they properly support the computer. Rotate each
individual foot outward 90 degrees (see “Moving the stabilizing feet” on
page 10).
Cabling the computer
If your computer cables and connector panel have color-coded connections, match
the color of the cable end with the color of the connector. For example, match a
blue cable end with a blue panel connector, a red cable end with a red connector,
and so on.
Attention: To prevent damage to equipment, connect the power cord last.
30
IBM IntelliStation M Pro Type 6219: Installation Guide