IBM INTELLISTATION E PRO 6204, Руководство пользователя

Страница: 89 / 162

Chapter 5. Installing options
73
Replacing the cover
Do the following to replace the cover of the tower model:
Note: If you removed the support bracket, reinstall it before you replace the cover.
See “Removing the support bracket” on page 59 for details.
1. Clear any cables that might impede the replacement of the cover.
2. Install the side cover by placing it into position on the computer. Be certain the
notches on the underside of the cover match up to the holes along the sides of the
computer. Press down on the cover release latch button as you close the cover
release latch to lock the cover.
3. If you have not done so already, make sure that the two front stabilizing feet are
rotated outward so that they properly support the computer. Rotate each
individual foot outward 90 degrees.
4. Reconnect the external cables and power cords to the computer; then connect
the power cords to electrical outlets.
5. Turn on the attached devices; then turn on the computer.
Connecting external options
You can connect a number of optional external devices to the connectors on the rear
and front of the computer. If your computer comes with a SCSI adapter installed, you
can attach a SCSI storage expansion enclosure to your computer.